What is pump suction

The lower connection at the pool is connected to the bottom of the pump of the sand filter system. The filtered water is fed back via the connection on the control dial at the top of the system via the upper end at the pool.

M. E.

& # 183 June 17th, 2015

1 of 1 thought so. They also? | Report abuse


Connect the water that comes from the pool to the bottom of the engine. Connect the water that comes from the pump back to the pool at the top of the boiler.

1 of 1 thought so. They also? | Report abuse



Connect the hose at the bottom of the pool to the pump inlet (horizontal) (suction). From the pump to the top of the boiler. Connect the "Pool" output from the boiler to the top of the pool (inlet). That's how it works for me perfectly.

Is this helpful? | Report abuse


I suck the water from the lower pool connection into the pump (horizontal connection), from there it goes from the upper connection of the pump into the sand filter as shown in the picture. The hose then goes from the sand filter (connection "pool") to the upper connection of the pool (inlet).

Fozzy

& # 183 June 17th, 2015

0 of 1 thought so. They also? | Report abuse